MT-300 is a revolutionary device. Its TFT colour display with capacitive touch-screen allows using this device in a completely new manner. MT-300 makes available on its display all possible variables to obtain a perfect measurement; your task will only be to “touch” what you really want to measure: then simply leave the rest to MT-300’s micro-processor!
The device complies with all requirements as regards the safety of electric systems: test of RCDs type A, AC also up to 1000 mA and type B; insulation, continuity, earth resistance tests (this also with the aid of the optional clamp T2100).
With the appropriate programming guided by the touch-screen system, this device can test the interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C, D, K and fuses type gG and aM! The device can be used with external feelers for measuring environmental parameters such as air temperature/humidity, illuminance (Lux) further to measuring leakage currents, cosphi, power and harmonics, Loop/Line impedance and calculating the assumed short-circuit current with high resolution (0.1mOhm) in TN systems with use of optional accessory IMP57. Cutting-edge management of measurement with indication, at the end of each safety test, of compliance or non-compliance with requirements with simple symbols OK o NOT OK.
Available through HT China office on the Chinese market only. For the international market please refer to MACROTESTG3.
When used with Multimeters and Clamps, the NOCANBA adapter (optional) is required.
When used with the PQA820, the ACONBIN adapter (optional) is required.
When used with the PQA924, the ACON3F5M adapter (optional) is required.
When used with Multimeters and Clamps, the NOCANBA adapter (optional) is required.
When used with the PQA820, the ACONBIN adapter (optional) is required.
When used with the PQA924, the ACON3F5M adapter (optional) is required.
VA504 has been designed to those who always want to have everything at hand. Further to the space for housing the device and its accessories such as measuring cables, earth rods, etc., VA504 is provided with an internal space for transporting and protecting also clamps for earth measurements such as T2000 or T2100. It is therefore the ideal solution for those who want to carry and protect their devices from water, dust and hostile environments.