Hot wire digital thermo anemometer with temperature, humidity and air speed measurement
HTA105 was designed for air speed measurement with selection of European or Anglo-Saxon measuring units.
The hot wire anemometer carries out measurements using an extensible telescopic probe capable of taking also measurements of temperature and humidity thanks to its built-in sensors.
Additional functions include measurement of air volumetric flow rate (CMM and CFM parameters) as well as calculation of average values in space and time. HTA105 is fitted with MAX/MIN and Data HOLD function in addition to an internal memory to store air speed measuring results.
It is provided with a back-lighted double display and auto power off to save internal battery life.
Functions
| Measurement of wind speed in m/s
|
|
| Measurement of wind speed in m/s
|
en m/s ; Km/h ; ft/min ; MPH ; knots |
| Air temperature/humidity measurement with in-built sensor
|
from 0,0°C to 50,0°C |
| Measurement of air relative humidity in %RH
|
from 0% RH to 100% RH |
| Data HOLD
|
|
| Backlight
|
|
| Auto Power OFF
|
|
| Power supply
|
1 x 9V IEC6F22 |
| Mechanical protection
|
IP40 |
| Weight in grams (batteries included)
|
240 gr |
| Weight
|
Telescopic probe 165 gr |
| Size (LxWxH) (mm)
|
190 x 65 x 45mm |
| Size (LxWxH) (mm)
|
Telescopic probe from 13 cm to 1 m |
Guidelines
STANDARD ACCESSORIES
Batteries and user manual
Environmental testers rigid case
OPTIONAL ACCESSORIES
